Developer — Identify Machine After for Public Works

Councils & Public Works

Council and public works briefs should state the asset outcome, scope boundaries and evidence needed for acceptance. Naming a machine too early can obscure whether the work requires design, bulk excavation or surface correction.

Before moving material

Identify the asset owner, procurement brief and work-zone controls.

Receiving operation and checks

Record the verified result and any work outside the contractor's scope. Check that the completed work answers the brief rather than a machine-based promise.

No council endorsement, supplier approval or procurement status is implied.

Machine Before - Dugong - Machine After

The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.

Before moving material

Identify the upstream operation and its remaining defects.

Receiving operation and checks

Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.

The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.

How the Dugong Works

The Dugong workflow separates material collection from its final placement. Once suitable material is loaded, it can be carried to the receiving area and then graded into the required surface.

Before moving material

Identify cut limits, usable material and the receiving level.

Receiving operation and checks

Check the surface and perform the required compaction or crop preparation. Compare source and receiving levels after movement.

Operating instructions for the supplied configuration take precedence over a general website explanation.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology