Topsoil — Before-After Gallery

Machine Before - Dugong - Machine After

The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.

Before moving material

Identify the upstream operation and its remaining defects.

Receiving operation and checks

Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.

The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.

Topsoil Redistribution

Topsoil redistribution should preserve the growing layer rather than use it as general structural fill. Changes in depth can affect later cultivation, turf or planting.

Before moving material

Measure existing topsoil depth and locate suitable receiving areas.

Receiving operation and checks

Complete crop or landscape soil preparation after redistribution. Check layer depth and look for unwanted mixing with subsoil or aggregate.

Do not assume soil from every high area is suitable growing medium.

Uneven Topsoil

Uneven topsoil can mean different layer depths even when the upper surface looks smooth. That matters when the next use requires a consistent growing layer.

Before moving material

Check topsoil depth separately from overall surface elevation.

Receiving operation and checks

Complete cultivation, planting or turf establishment. Measure depth in both former high and low areas.

Do not use topsoil as a remedy for an uncorrected structural formation.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology