Gnss Grading — Before-After Gallery
Describe the application, material route, growing or working area and proposed rental period. A listed scenario is not a claim that a Dugong rental unit or local service is available.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Machine Before - Dugong - Machine After
The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.
Before moving material
Identify the upstream operation and its remaining defects.
Receiving operation and checks
Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.
The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.
Read the complete Machine Before - Dugong - Machine After guideDugong + GPS/GNSS Grading
Using Dugong with GPS/GNSS grading requires a complete positioning and implement-reference workflow. Antenna position must be related to the working edge and the issued surface design.
Before moving material
Confirm corrections, datum and the intended control installation.
Receiving operation and checks
Survey or otherwise independently check the resulting grade. Record interruptions and the design revision used.
A tractor's navigation system alone does not establish scraper grade-control capability.
Read the complete Dugong + GPS/GNSS Grading guideGNSS Machine Control
GNSS machine control combines positioning, machine geometry and design information. An accurate receiver position is not automatically an accurate cutting-edge position.
Before moving material
Confirm corrections, sensor arrangement and the coordinate reference.
Receiving operation and checks
Check the completed surface with an independent method. Inspect offsets, design revision and correction status when results disagree.
Compatibility must be confirmed for the actual machine and control installation.
Read the complete GNSS Machine Control guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group