Laser Grading — Transport Visual

Dugong + Laser Grading

Using Dugong with laser grading requires a compatible receiver installation, stable reference and understood cutting-edge offset. The laser indicates where the surface belongs; the machine moves the material.

Before moving material

Confirm the proposed control equipment with the suppliers.

Receiving operation and checks

Verify the formed surface independently. Recheck offsets after geometry changes or adjustments.

No blanket automatic-control compatibility or tolerance is promised.

Laser Grading Buckets

A laser grading bucket combines a grading implement with laser-referenced elevation information. The receiver and control system guide position; the implement still determines how soil is moved.

Before moving material

Confirm transmitter setup, receiver mounting and the implement's actual functions.

Receiving operation and checks

Verify the finished level using independent checks. Check calibration and the effect of receiver movement relative to the cutting edge.

Laser guidance is not a guarantee of tolerance, material suitability or certification.

Laser Land Grading

Laser land grading references elevation to a transmitter-defined plane or gradient arrangement. It can be useful where the required surface fits that reference, provided setup and receiver geometry are controlled.

Before moving material

Confirm the target surface and transmitter/receiver compatibility.

Receiving operation and checks

Check finished levels independently of the receiver display. Watch for reference movement, blocked reception and incorrect offsets.

No accuracy figure is promised without the specified system and working conditions.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology