Laser Grading — Before-After Gallery
Describe the application, material route, growing or working area and proposed rental period. A listed scenario is not a claim that a Dugong rental unit or local service is available.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Machine Before - Dugong - Machine After
The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.
Before moving material
Identify the upstream operation and its remaining defects.
Receiving operation and checks
Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.
The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.
Read the complete Machine Before - Dugong - Machine After guideDugong + Laser Grading
Using Dugong with laser grading requires a compatible receiver installation, stable reference and understood cutting-edge offset. The laser indicates where the surface belongs; the machine moves the material.
Before moving material
Confirm the proposed control equipment with the suppliers.
Receiving operation and checks
Verify the formed surface independently. Recheck offsets after geometry changes or adjustments.
No blanket automatic-control compatibility or tolerance is promised.
Read the complete Dugong + Laser Grading guideLaser Grading Buckets
A laser grading bucket combines a grading implement with laser-referenced elevation information. The receiver and control system guide position; the implement still determines how soil is moved.
Before moving material
Confirm transmitter setup, receiver mounting and the implement's actual functions.
Receiving operation and checks
Verify the finished level using independent checks. Check calibration and the effect of receiver movement relative to the cutting edge.
Laser guidance is not a guarantee of tolerance, material suitability or certification.
Read the complete Laser Grading Buckets guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group