Cutting High Spot — Survey Overlay

Dugong Working Weight & Cutting Action

Dugong working weight should be considered in relation to cutting depth, traction and the complete tractor combination. A carried load changes transport and hitch demands as well as the cutting operation.

Before moving material

Confirm current machine weight, permissible loading and tractor limits.

Receiving operation and checks

Recheck handling and receiving-surface condition as loads change. Record the actual configuration used for operating observations.

Weight and blade-pressure estimates are not a substitute for a compatibility assessment.

High Spots

A high spot is meaningful only relative to the intended surface. It may obstruct runoff, limit cultivation depth or sit above a construction formation. Cutting it without knowing the target can remove useful soil unnecessarily.

Before moving material

Measure the feature against surrounding levels and the agreed datum.

Receiving operation and checks

Recheck the corrected level and restore the appropriate surface layer. Check whether the high spot was a local deposit or part of the intended contour.

A visible mound is not automatically a defect.

Surveying for Land Grading

Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.

Before moving material

Define the survey area, control and required deliverables.

Receiving operation and checks

Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.

A topographic survey and a legal boundary survey serve different purposes.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology