Livestock Yard — Storm Damage

Livestock & Feedlots

Livestock yards and feedlots require clear separation between animal surfaces, machinery routes and effluent management. Surface cleaning and structural reconstruction are different interventions.

Before moving material

Remove animals from the work zone and identify the approved waste handling route.

Receiving operation and checks

Restore the required surface and follow the site's cleaning and biosecurity procedure. Check drainage paths, fences and exposed services after work.

Do not move contaminated material between clean areas or imply that grading controls disease.

Flood-Damage Land Restoration

Flood-damage restoration starts with diagnosis. Deposited sediment, scour, damaged drainage and weakened ground call for different responses.

Before moving material

Inspect the site after water has receded and identify services and unstable areas.

Receiving operation and checks

Restore drainage and prepare the repaired surface for its intended use. Check that the repaired area drains without exporting new problems downstream.

Contamination, erosion and unstable ground may require specialist assessment before grading.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology