Livestock Yard — Low Spots

Low Spots

A low spot may be a true grade deficit, settlement over weak ground or part of a designed drain. The cause determines whether filling is appropriate.

Before moving material

Compare surface levels with the intended drainage path.

Receiving operation and checks

Compact or prepare the repaired material for its next use. Check the repair against adjacent levels and observe whether water still collects.

Repeated settlement needs investigation rather than repeated surface filling.

How to Move Soil From High Spots to Low Spots

Moving soil from high spots to low spots requires a measured surplus and a suitable receiving area. A low patch caused by weak support may need repair before fill.

Before moving material

Check source material and the low area's cause.

Receiving operation and checks

Prepare the receiving layer and restore the source surface. Check both final levels and soil-layer depth.

Avoid filling designed drains or mixing unsuitable subsoil into growing medium.

Livestock & Feedlots

Livestock yards and feedlots require clear separation between animal surfaces, machinery routes and effluent management. Surface cleaning and structural reconstruction are different interventions.

Before moving material

Remove animals from the work zone and identify the approved waste handling route.

Receiving operation and checks

Restore the required surface and follow the site's cleaning and biosecurity procedure. Check drainage paths, fences and exposed services after work.

Do not move contaminated material between clean areas or imply that grading controls disease.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology