Livestock Yard — Settlement

Livestock & Feedlots

Livestock yards and feedlots require clear separation between animal surfaces, machinery routes and effluent management. Surface cleaning and structural reconstruction are different interventions.

Before moving material

Remove animals from the work zone and identify the approved waste handling route.

Receiving operation and checks

Restore the required surface and follow the site's cleaning and biosecurity procedure. Check drainage paths, fences and exposed services after work.

Do not move contaminated material between clean areas or imply that grading controls disease.

Repeated Settlement Diagnosis

Repeated settlement suggests the problem may lie below the visible surface. Filling a depression again can hide a weak or poorly prepared layer.

Before moving material

Record the timing and extent of movement and review material history.

Receiving operation and checks

Repair the confirmed cause and re-establish the intended layers. Monitor the repaired area under the intended use.

A scraper guide cannot diagnose geotechnical failure from a photograph.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology