Drain — Potholes

Drain Construction

Drain construction combines a designed invert with stable sides and a functioning discharge point. A scraper may form accessible shallow sections, while deeper or confined work may need an excavator.

Before moving material

Set out the route and locate utilities and crossings.

Receiving operation and checks

Finish side shaping, stabilisation and crossing details with the appropriate equipment. Survey invert levels at joins and the receiving end.

Depth, stability and discharge requirements can put the task beyond a compact scraper.

Potholes

A pothole can be a local surface failure or evidence of water and weak support below. The repair method should match its depth and cause.

Before moving material

Inspect the surrounding layer and water entry route.

Receiving operation and checks

Compact the repair and inspect the transition to the existing surface. Check that water is not trapped at the repair edge.

Simply pushing loose soil into a road pothole is not a durable pavement repair.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology